Amicale Spitfire - Cyberspit - Forum Triumph Spitfire

Amicale Spitfire
Bienvenue sur Cyberspit !
Ce forum est réservé aux discussions autour des Triumphs.
Lisez-moi

Pour assurer la bonne réception de la réponse à votre message, pensez à enregistrer amicalespitfire.org sur la liste de vos adresses de confiance dans les paramètres de votre messagerie.

Envoyer un email directement à Wilbras
Vous	Votre email (doit être valide pour une réponse !)
Sujet
Message
Recharger le fil	Cliquer une seule fois !

Wilbras * 26/11/2014 15:59	re :
Un semblant de réponse de CharlieB de South Bucks: "The diff mounting plate is sandwiched between two rubber bushes & the position of the nut when tightened is fixed by the shoulder on the stud welded to the chassis. So if you put a thick washer under the rubber bushes they will be compressed more & given the top one is much thicker than the bottom one it will be compressed the most hence the diff will be raised by a little less than the thickness of the washer." http://clubtriumph.eu/cgi-bin/forum10/Blah.pl?m-1311621691/

Wilbras *

26/11/2014
15:59

re :

Un semblant de réponse de CharlieB de South Bucks:

"The diff mounting plate is sandwiched between two rubber bushes & the position of the nut when tightened is fixed by the shoulder on the stud welded to the chassis. So if you put a thick washer under the rubber bushes they will be compressed more & given the top one is much thicker than the bottom one it will be compressed the most hence the diff will be raised by a little less than the thickness of the washer."

http://clubtriumph.eu/cgi-bin/forum10/Blah.pl?m-1311621691/